iTechLCD’s Programmable Tactical Awareness Controller (DTT1500R) is aruggedized Mil Spec LCD display, engineered to operate under the most extreme environments found in military tactical wheeled and tracked vehicles. The DTT1500R offers a tactile programmable button interface (ASCII
or HEX code) via RS232 protocol for PC software functions.
The ruggedized military computer display can be used in operations such assituational awareness and vehicle tracking, and surveillance and reconnaissance.
The DTT1500R display can be used in either day or night operations.It comes equipped with features such as enhanced sunlight readability with
high brightness, low power consumption and is NVIS compliant.
iTechLCD’s integrated NVIS options either produce near zero color shift or
slight color shift for full sunlight readability. The integrated NVIS is MILSTD-
3009 compliant, and can be viewed with NVGs (Night Vision Goggles)
through the entire brightness range. Dimming is not necessary to meet
MIL-STD-3009, Class B NVIS requirements.
Features
• 15.0" TFT AM LCD XGA (1024 x 768)
• (2) RGB Inputs
• (1) RGB Output
• (1) Composite Video Input
• (1) Composite Video Output
• (12) Programmable Tactile Buttons (ASCII or HEX code via RS232 protocol)
- Tactile Button OSD User Interface (MIL-PRF-22885G; 1 million+ actuations)
• LED Backlight (1000:1 Dimming Ratio)
• Sunlight Readable
• Anti-reflective/Antiglare Surface Treatments
• Milled AL Case, sealed to IP67 NEMA 6
• Mounts via RAM or Panel Mount
• Military Grade Sealed Connectors
• Wide Range Input (10-36 VDC)†
• Protected against Internal Short Circuit, Load Dump, Over Voltage and Reverse Polarity
• 32 Watts Maximum Power Consumption
Optional Features
• NVIS Compliance (MIL-STD-3009 Class B)
• Touch (Touch works on both RGB ports)
| Technical Specifications |
| Display |
15.0" TFT AM, XGA, LCD, 16M Colors |
| Sunlight Readable |
1,000 nits* |
| Contrast Ratio |
350:1 |
| Dimming Ratio |
1000:1 |
| Viewing Angle (typical) |
160° (H) x 135° (V) |
| Video Input |
(2) RGB, (2) RS-170 (NTSC/PAL) (B,D,G,I K) |
| Mounting |
Panel or RAM Mount |
| Power Conditioning |
Internal Short Circuit Protection
Load Dump Protection
Over Voltage Protection
Reverse Polarity Protection |
| Power Consumption |
8 Watts Min - 32 Watts Max |
| Environmental Specifications |
| IP Rating |
IP67 (NEMA 6 Submersible) |
| Operating Temperature |
-40°C to 70°C (-40°F to 158°F) |
| Storage Temperature |
-40°C to 70°C (-40°F to 158°F) |
| Humidity |
0-100% |
| Altitude |
45,000 ft. |
| Military Specifications |
| MIL-STD-461E |
EMI |
| MIL-STD-810F |
Method 501.4 II-Op; High Temperature |
| MIL-STD-810F |
Method 502.4 II-Op; Low Temperature |
| MIL-STD-810F |
Method 514.5; Procedure 1, General Vibration |
| MIL-STD-810F |
Method 516.5, Procedure 1, Functional Shock |
| MIL-STD-1275D† |
Wide Range DC Power Input
10-36 VDC (12, 24, 28 VDC nominal) |
| MIL-STD-3009* |
NVIS Compliance (Optional) |
| MIL-PRF-22885G |
Sunlight Readability for Buttons |
| MIL-PRF-22750F |
Housing Milled Aluminum, Tan Finish |
| MIL-DTL-26482 |
Connector (Qualified) |
| MIL-DTL-38999 |
Connector (Qualified) |
* iTechLCD’s integrated NVIS options either produce near zero color shift or slight color shift for full sunlight readability. The integrated NVIS is MIL-STD-3009 compliant, and can be viewed with NVGs (Night Vision Goggles) through the entire brightness range. Dimming is not necessary to meet MIL-STD-3009, Class B NVIS requirements. Brightness levels will be reduced with the NVIS option.
* The power range specified covers momentary environmental fluctuations generally found in a mobile environment while display is operating. For power initialization and continual operation, nominal
voltages are required.
DIMENSIONS |
MILLIMETERS |
INCHES |
| Height |
315 mm |
12.4" |
| Width |
386 mm |
15.2" |
| Depth (with connectors) |
68 mm |
2.69" |
| Depth (w/out connectors) |
51 mm |
2.0" |
| Weight |
9.10 lbs ± .25 lbs.
(4.1 kg ± .1 kg) |
Products
